Frame Assembly
Lay all frame members face down on a clean surface. Match numbers or letters at corners to ensure proper assembly. Insert fittings into matching frame member. Line up holes in frame with the holes in fittings and corner braces. Use hardware supplied by Hurley Screen to mount frame members together.

Mounting Screen with H-Pads
Starting at the side, carefully begin to unroll screen. Press together the top corner H-pads and a few equally spaced apart along the side. As you proceed to unroll the screen, press together every fourth or fifth pad until the screen is temporarily suspended. Once the screen is completely unrolled, center screen to the frame(some pads may need to be adjusted to do so). Then, start by pressing the center H-pads together. Continue to the left or right along top by puting tension on the screen and pressing pads together as you go. Repeat process on opposite side of top and then again on the bottom and sides. It may be necessary to go around a few times and adjust H-pads to obtain a perfectly flat surface.