Products > ElectraView > Vision > Installation Instructions
ElectraViewTM Vision Model "XL"
- Please read all instructions before installing.
- Follow all instructions carefully. Failure to install or use this product in accordance with the enclosed instructions will void your warranty.
- Verify that all operating switches are in the OFF position before installation.
Installation Instructions
When hanging case, ensure that all mounting hardware is securely attached to solid structural support or members. (Overhead beams or rafters for suspended installation, studs or other structural support for wall installation).
If screen is not hung level, the material will not roll up correctly and will wrinkle.
Screens up to 24' wide include three mounting brackets and up to 28' include four brackets. Locate these brackets along the case to line up with supporting beams or studding and to evenly support the screen's weight. The end brackets should be installed about 1 foot from each end.
 Suspended by Chain: the screen can be hung using the enclosed mounting brackets and quick links with chains and turnbuckles for leveling. Each turnbuckle and chain must be rated for lining 250 lbs. Be sure the chains are attached to a solid beam and are plumb.
|
 Suspended by All Thread: the screen may also be hung using mounting brackets and All Thread (Hurley Screen recommends using 1/2" All Thread). Make sure the All Thread is attached to a solid beam and is level.
|
 Recessed in Ceiling: when mounting the screen in a recess, shown here using All Thread, make sure the opening is constructed to fit the screen case.
|
Also, review the operating and wiring instructions for this model.
Click here for a printable version of this page:
HURLEY SCREEN . 110 Industry Lane . Post Office Box 296 . Forest Hill, MD 21050
Tel: 410.879.3022 - Toll Free: 877-487-4912 - Fax: 410.838.8079
| 
